• Image 1

Pampena Motorsports Head-Lift Fix


Product Description

There are 2 areas where the deck of the head is not strong enough to keep it from bending. That is the deck surface near the center of the intake valves AT the gasket ring and the same on the exhuast side. If you look in the coolant passages under the deck of the head you will see that this area is hollow and relies on just the thickness of the deck for strength. The rest of the sealing ring area is solid aluminum and has no flex.
If the studs were not strong enough and the heads were "lifting," there would also be leakage in other areas of the ring area ie. between cylinders and other areas where the head is also solid. The deck itself is not strong enough to stop from flexing in these 2 hollow areas.

THE FIX... machining out those hollow areas and installing aluminum stantions in those areas just beneath the head gasket ring and welding the areas back up. This leaves no more hollow area under the gasket fire ring that will flex out of the way and still has room for coolant in the area.
We've done alot of testing here, before and after using presses and measuring flex in these marked areas where we always see them leak.

Studs and O-ringing are not the answer.
Order the headlift fix, send in your cylinder heads, and worry no more!

*NOTE: You must send in your heads to have the headlift fix performed.  Return shipping will be paid once the procedure has been completed and the heads are ready to ship back to you*

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

50.00 LBS
Free Shipping